Fritsch ANALYSETTE 3 - Accessories; AUTOSIEVE Program

7 Accessories
7.1
AUTOSIEVE program
Together with the AUTOSIEVE program package, the serial interface
makes it possible to control all funcons of the sieve shaker using a com-
puter and to ensure the reproducibility of the sieving processes.
The automac evaluaon of sieving results has also reduced the work-
load. With the help of the AUTOSIEVE program package and scales,
sieving results can be displayed and saved in dierent forms aer
weighing the individual fracons.
7.2 Connecng the PRO sieve shaker to the serial interface
Screw the 9-pin D-SUB socket of the connecng cable included with the
AUTOSIEVE program to the D-SUB mul-pin connector of the sieve
shaker using its screw connecon. Plug the other end of the connecng
cable into the serial interface of the computer using the 9-pin plug.
7.3 Sound absorpon hood
In order to reduce the operang noise of the micro mill a sound absorp-
on hood (Art. no. 00.0130.17) is available.
Accessories
- 34 -