Fritsch ANALYSETTE 3 - Electrical Connection

4.4 Ambient condions
WARNING!
Mains v
oltage!
– The device may only be operated indoors.
– The surrounding air may not carry any electrically
conducve dust.
– Maximum relave humidity 80% for temperatures
up to 31°C, linearly decreasing down to 50% rela-
ve humidity at 40°C.
n The r
oom temperature has to stay between 5 - 40°C.
n Altudes up to 2000 m
n Degr
ee of polluon 2 according to IEC 664.
4.5 Electrical connecon
Before establishing the connecon, compare the voltage and current
v
alues stated on the type plate with the values of the mains system to be
used.
CAUTION!
Ignoring the values on the type plate may result in
damage to the electrical and mechanical components.
4.5.1 Adjusng the mains voltage
4.5.1.1
Version SPARTAN and PRO (valid ll serial number 05727)
CAUTION!
If the v
alues 06 or 07 are set at a voltage of 230V~, it
will result in a defect in the sieve shaker during opera-
on. Failure to observe this will render void the guar-
antee, and releases us from liability for any resulng
damage to the device.
NOTICE!
Only qualied personnel may change the voltage range
on the de
vice!
Installaon
- 20 -