9 Maintenance
DANGER!
Mains v
oltage
– Before beginning with maintenance work, unplug
the mains plug and protect the device against being
unintenonally switched back on again!
– Indicate maintenance work with warning signs.
– Maintenance work may only be performed by spe-
cialised personnel.
– Put safety equipment back into operaon aer
maintenance or repair work.
We recommend keeping a safety logbook
Ä
Chapter 14
„Safety logbook“ on page 51, where all work (mainte‐
nance, repairs......) performed on the device is entered.
The most important element of maintenance is regular
cleaning:
9.1 Maintenance of the TorqueMaster clamping device
The clamping unit is lar
gely maintenance-free. Cleaning with standard
solvent-free cleaning agents is permissible.
The clamping unit is closed to a large extent. Make sure that as lile
liquid, dust, dirt or other foreign bodies as possible enters the clamping
unit through the outlets for the toothed belts.
Maintenance
- 44 -
To Next Page
Loading...