Fritsch ANALYSETTE 3 - Saving and Invoking the Settings; Micro Sieving

6.9 Saving and invoking the sengs
It is possible to save the amplitude sengs: sieving me/grinding dura-
on, interval length and MICRO on/o. There are 9 memory locaons
provided for this.
n Sa
ve sengs: Press SAVE key
n Invoke sengs: Press PROGRAM key
When the PROGRAM key is pressed, the 9 memory locaons appear in
turn and the sengs are displayed.
6.10
Micro sieving
Aer pressing the MICRO key, a control lamp in the key lights up and the
amplitude is set to 0.1 mm. Now an amplitude of max. 0.5 mm can be
selected. Pressing the MICRO key again switches o the limit.
If the device is in operaon, it cannot be switched to "MICRO" operang
mode.
If the device is operated with the sengs of a memory
locaon 1‐9, no sengs can be changed during opera‐
on. If program 0 is displayed on the display, sengs
can also be changed during operaon.
Using the device
- 33 -