Fritsch ANALYSETTE 3 - Electrical Safety

NOTICE!
– The toothed belts must only be released or
clamped in the s
witched o state.
– Before switching on again, ensure that the two
toothed belts are evenly, ghtly clamped using the
knurled knobs.
2.7 Hazardous points
n Crushing haz
ard at the sieve tensioning system
n Crushing hazard between vibratory plate and housing
2.8 Electrical safety
2.8.1
General informaon
The main switch separates the device from the mains on two poles.
2.8.2 Protecon against restart
Aer switching o at the main switch and switching on again, the START
key must be pressed for start-up.
2.8.3 Overload protecon
The mains fuse provides overload protecon.
Safety
informaon and use
- 16 -