3 Boiler Installation
3.1 Transport
The boiler comes packed on a pallet.
Move the boiler without jarring or jolting
Follow the instructions on the packaging
when moving the boiler
3.1.1 Positioning
Use a fork-lift or similar lifting device to move the pallet and position
the boiler or
Attach a cable winch or similar lifting device to the eyelet on the
boiler and position the boiler
3.1.2 Remove boiler from pallet
At the front of the boiler:
Remove securing devices used during transportation on the left and
right side of the base.
At the back of the boiler:
Remove securing devices used during transportation on the left and
right side of the base.
3.1.3 Temporary storage
If the system is to be installed at a later date:
Store the boiler, insulation and control unit in a safe, dust-free, and
dry location
Moisture and frost reduce the effectiveness of insulation and can
destroy electronic components.
To Next Page
Loading...
