Froling FHG 20 - 3.7 Electrical connection

Boiler Installation
Electrical connection
Froling GmbH, Industriestrasse 12, A-4710 Grieskirchen, Austria Page 37
www.froling.com M1060008_US
3
3.7 Electrical connection
For the FHG 3000 boiler a 240 VAC, 60 hertz, 4 wire power supply is
required. This electrical connection should be from a dedicated 15 amp,
circuit breaker. A master service switch for the boiler, mounted on or in
the proximity of the boiler, is recommended. Locally enforced electrical
codes must be followed.
Work on electrical components is very dangerous. Avoid severe personal
injuries and death.
Only licensed electricians to perform electrical work!
3.7.1 Core Module - Overview
Both jumpers must
be set!