Froling T4e - 5.8 Software update Lambdatronic 3200

5 | FAQ
110 B1820023_en | Service handbook Lambdatronic H 3200 - T4e
5.8 Software update Lambdatronic 3200
The following description shows the software update process for systems with
Lambdatronic 3200 and a touch control in the system environment (also applies to
systems with button boiler console and touch room console). The Froling Flash Update
Wizard (core module) as well as a USB storage device is necessary to perform the
software update. The procedure for establishing a connection and any necessary
bootloader update is described in the documentation of the Flash Update Wizard.
Overview of main steps during a software update
r Perform flash update - but do not close the Wizard
Lambdatronic
Se
rvice
1
Ü "Carrying out a software update on the boiler controller" [}111]
r Perform software update of all touch controls
2
USB-A
U
SB-C
USB-A
Ü "Carrying out a software update on the touch control" [}113]
r Close Flash Update Wizard - restart controller
Lambdatronic
Se
rvice
3
Ü "Finishing a software update" [}114]