Initial start-up with settings wizards | 3
B1820023_en | Service handbook Lambdatronic H 3200 - T4e 39
3.3 Switching on for the first time
Once you have connected the device to the power supply and switched on the main switch, the display begins
with a query regarding the basic settings of the system (language, production number of the boiler system, date,
and time). Then the basic screen of the touch display is shown.
1: Selection of the controller language 2: Setting the production number (see identification plate)
3: Setting the date and time 4: Display of the basic screen
To Next Page
Loading...
