Fronius Acctiva Professional Flash - Page 50

14
9. Set maximum external power supply (Setting range: see Technical Data)
- Press Start/Stop button
- Adjust external power supply in 0.5 A steps
- Press Start/Stop button to confirm setting
7. Set floating charge voltage (setting range: 12.0 - 15.5 V)
- Press Start/Stop button
- Display flashes. Adjust floating charge voltage in 0.1 V steps
- Press Start/Stop button to confirm setting
8. Set external power supply voltage (setting range: 12.0 - 15.5 V)
- Press Start/Stop button
- Adjust external power supply voltage in 0.1 V steps
- Press Start/Stop button to confirm setting
6. Set max. charging time until float charging (setting range: 10 min - 24 h)
- Press Start/Stop button
- Display flashes. Adjust time in 10 min intervals
- Press Start/Stop button to confirm setting
USER U/I subme-
nu (user settings
for current and
voltage)
(continued)
10. Press Start/Stop button to exit