Safety rules
Explanation of
safety instruc-
tions
WARNING!
Indicates a potentially dangerous situation.
▶
Death or serious injury may result if appropriate precautions are not taken.
CAUTION!
Indicates a potentially harmful situation.
▶
Minor injury or damage to property may result if appropriate precautions are
not taken.
NOTE!
Indicates a possibility of flawed work results and possible damage to the equip-
ment.
Please pay special attention when one of the symbols from the "Safety rules"
chapter appears in these instructions.
Safety IMPORTANT!
This unit must be operated in accordance with the technical specifications data-
sheet. This document is available on the corporate website of the manufacturer.
CAUTION!
Danger from crushing due to the incorrect handling of attachments and con-
nection parts.
Injuries to limbs may result.
▶
To avoid muscle strain or injury, use proper lifting techniques and if required
use a lifting aid.
▶
When lifting up, putting down, and attaching the inverter, use the integrated
grips.
▶
When fitting any attachments, ensure that no limbs are located between the
attachment and the inverter.
▶
Do not hold onto the terminals when locking and unlocking.
General This device has been manufactured with quality control procedures and is in
compliance with established safety regulations. However, improper use or misuse
may pose potential risks including:
-
Serious or fatal injury to the operator or third parties
-
Damage to the device and other material assets belonging to the property
owner
All personnel involved in commissioning, maintenance, and servicing of the
device must:
-
Be suitably qualified to perform electrical work, as defined by the NFPA 70
-
Have knowledge of and experience in dealing with electrical installations
-
Have fully read and precisely followed these Operating Instructions
6
To Next Page
Loading...
Need help?
General
