Output data Full Backup
5)
Power factor
0.8 - 1 ind. / cap.
2)
Switching time <45 sec.
WLAN
WLAN
Frequency range 2412 - 2462 MHz
Channels / power used Channel: 1-11 b,g,n HT20
Channel: 3-9 HT40
<18 dBm
Modulation 802.11b: DSSS (1Mbps DBPSK, 2M-
bps DQPSK, 5.5/11Mbps CCK)
802.11g: OFDM (6/9Mbps BPSK,
12/18Mbps QPSK, 24/36Mbps 16-
QAM, 48/54Mbps 64-QAM)
802.11n: OFDM (6.5 BPSK, QPSK,
16-QAM, 64-QAM)
Explanation of
footnotes
1) The maximum current from the inverter to the PV module if an error oc-
curs in the inverter. Guaranteed by the electrical design of the inverter.
2) Depending on the country setup or device-specific settings
(ind. = inductive; cap. = capacitive).
3) Assured by the electrical design of the inverter.
4) The inverter can be upgraded to a GEN24 Plus Hybrid device in the future
through the UP.storage software upgrade. This upgrade activates battery
functionality, enabling the possibility of a Full Backup power solution.
However, external grid switching devices are required for this functionality.
The technical specifications for battery operation and Full Backup opera-
tion are detailed below.
5) For Full Backup, additional external components are required for grid
separation.
Integrated DC
disconnector
General data
Product name Benedict LS32 E 7905
Rated insulation voltage 1000 V
DC
Rated impulse withstand voltage 8 kV
Suitability for insulation Yes, DC only
Utilization category and/or PV utilization
category
according to IEC/EN 60947-3
utilization category DC-PV2
Rated short-time withstand current (I
cw
) Rated short-time withstand cur-
rent (I
cw
): 1000 A
Rated short-circuit capacity (I
cm
) Rated short-circuit capacity
(I
cm
): 1000 A
111
To Next Page
Loading...
