Fuji Xerox ApeosPort-VII C4421 - Operations During Scanning; Stopping the Scan Job; Scanning the Next Original; Confirming the Job State

7 Scan
176
Operations during Scanning
The following operations are available in the scanning screen.
Stopping the Scan Job
1 Tap [Pause] or [Delete].
Note

A message is displayed when there are documents remaining in the document feeder. Follow the instruction
on the screen to remove the documents.
Scanning the Next Original
1 Tap [On] under [Next Original].
Note

When you put a check mark for [Next Original] in the features list, the screen in Step 2 appears.
2 You can perform the following operations displayed in the confirmation screen.
Scanning the Next Original
1) Load the next original.
2) Tap [Scan Next Original].
Changing the Settings for the Next Original
1) Load the next original.
2) Tap [Edit Next Original Settings].
3) Change the settings in the features list.
Reference

For information on the features list, refer to "Features List" (P.182).
4) Tap [Scan].
3 When all originals have been scanned, tap [Save (Last Original)].
Confirming the Job State
1 Tap [Jobs].
The [Jobs] screen appears.
Reference

For information on job status, refer to "Jobs" (P.219).