Fuji Xerox ApeosPort-VII C4421 - [Scan Settings]

[App Settings]
275
 [Data Processing Order]
Prints jobs in the order of becoming print-ready status after receiving the jobs.
If you instruct the device to print jobs of multiple documents continuously, the device may
preferentially print a job which was sent later depending on the time for data processing.
 [First In First Out]
Prints jobs in the order of lpr print submission.
Important

This setting is valid only when [Receiving Buffer - LPD] is set to [Spool]. When any other option is selected,
printing is performed in [Data Processing Order].
 [OCR Font Glyphs (0x5C)]
Allows you to select [Backslash] or [Japanese Yen Sign] to print 0x5C character when the
OCR fonts are used.
[Scan Settings]
[Screen Defaults]
Changes the preset of buttons prepared for [Reduce / Enlarge] on the feature list.
Select the setting value to assign to the buttons from ones registered with [Reduce /
Enlarge Presets].
Reference

For how to set [Reduce / Enlarge Presets], refer to "[Reduce / Enlarge Presets]" (P.276).
[Scan (PC) - Defaults]
 [Login Credential to Access Destination]
Set whether or not to use a user authenticated by the remote server when the user logs in to
the destination computer for the SMB transmission. This setting is effective for remote
authentication.
 [User Name for FTP Scan]
Specify whether or not to include the domain part of the credentials when the name of a
user authenticated by the remote server is used as a login user name for FTP transmission.
 [User Name Only]
Uses only the user name part (before "@") of the login credential for the login name. The
domain part is not used.
 [Add Domain Name]
Uses the full login credential name, including the domain name (after "@"), for the user
name.
 [User Name for SFTP Scan]
Specify whether or not to include the domain part of the credentials when the name of a
user authenticated by the remote server is used as a login user name for SFTP transmission.
 [User Name Only]
Uses only the user name part (before "@") of the login credential for the login name. The
domain part is not used.