[App Settings]
297
[200 dpi (High Speed)]
Converts color images to black and white images of 200 dpi on a document when the
document is transferred as a fax.
Reduces the time when converting color images of 300 dpi or higher to black and white
images. 200 dpi is equivalent to [Fine (200 dpi)] in fax transmission.
[Auto Start Job Flow Sheet]
Set who can automatically start job flow sheets.
[Create Job Flow Sheet]
You can register new job flow sheets and change details.
For more information, refer to "Creating Job flow Sheet Triggered by Folder" (P.197).
[USB Settings]
[Screen Defaults]
Changes the preset of buttons prepared for [Reduce / Enlarge] on the feature list.
Select the setting value to assign to the buttons from ones registered with [Reduce /
Enlarge Presets].
For how to set [Reduce / Enlarge Presets], refer to "[Reduce / Enlarge Presets]" (P.297).
[Original Size Defaults]
You can set the original sizes displayed in [Original Size].
You can assign original sizes to the buttons other than [Auto Detect].
If you frequently use non-standard size paper for scanning, setting non-standard size as the
default will save your time to specify the size each time.
[Output Size Defaults]
Set the sizes to display when selecting [Auto %] for scanning documents at [Reduce /
Enlarge].
You can assign any output size to output size buttons.
Assigning the output sizes to the buttons will save your time to specify the size each time.
[Reduce / Enlarge Presets]
Set the magnifications displayed as [Proportional %] under [Reduce / Enlarge].
You can change the magnification to the Reduce/Enlarge Preset buttons other than
[100%] and [Auto %].
[Other Settings]
You can configure other settings related to the Scan services specifications.
For details of the displayed items, refer to "[Other Settings]" (P.277) of [Scan Settings].
To Next Page
Loading...
