13 Advanced Settings
268
[Page Number - Top Left] to [Page Number - Bottom Right]
You can adjust the position to print a page number finely.
[Bates Stamp - Top Left] to [Bates Stamp - Bottom Right]
You can adjust the position to print a bates stamp finely.
[Annotations - Edit Comment 1] to [Annotations - Edit Comment 8]
You can set whether or not to allow users to register or change the text printed as
annotation.
When [Do Not Allow] is selected, all users including the system administrator cannot edit
the text.
[Maximum Number of Sets]
Set the maximum number of allowed sets to copy. Users will not be able to specify a larger
number of sets to copy than the value set here.
[Image Rotation - Direction]
If the orientation of the paper currently loaded in the tray differs from that of the loaded
original, set a reference position for image rotation to copy in the same orientation.
[Original Size Defaults]
Set the original sizes displayed in [Original Size].
You can assign original sizes to the buttons other than [Auto Detect].
If you frequently make copies of non-standard size document, setting non-standard size as
the default can avoid extra operations required during the use of the device.
[Reduce / Enlarge Presets]
Set the magnifications displayed as [Proportional %] under [Reduce / Enlarge].
You can change the magnification to the Reduce/Enlarge Preset buttons other than
[100%] and [Auto %].
[Custom Colors]
Set the custom colors used for [Single Color] and [Dual Color] in the [Output Color] screen.
[ID Card Copy Settings]
[Copy Control]
[Fine-tune 100%]
You can fine-tune magnification when copying at 100% (actual size). The set value is
applied to [100%] in the [Copy] screen is set to 100%.
This feature is applied only when a copy is made using the document glass. This setting is not reflected in the
magnification (100%) under [Independent X - Y%] or [Calculator %].
A magnification displays [100%] even if [Fine-tune 100%] is selected.
To Next Page
Loading...
