15 Authentication and Accounting Features
370
Registering a User (Local Account Authentication)
Register users as local accounts to the device.
Management authorization, service usage restrictions, and page limit can be imposed for
each user individually.
You can register users at [Create / View User Accounts] under [Accounting] in the same way as well.
1
Tap [Device] on the Home screen.
2
Tap [Authentication / Accounting] > [Authentication / Security Settings].
3
Tap [Authentication] > [Create / View User Accounts].
4
Tap [No.] user is to be registered to.
[No.] represents the user management number.
5
Enter User ID, and then tap [OK].
6
Tap [User Name].
7
Enter the user name to be displayed and tap [OK].
8
If there is [Password], set password.
1) Tap [Password].
2) Select [New Password] and enter the password.
3) Tap [Next] and enter the same password.
4) Tap [OK].
For information on how registered users change their own password, refer to "Changing password by User"
(P.384).
9
Set email address as necessary.
1) Tap [Email Address].
2) Enter the email address, then tap [OK].
Email address is used in [From:] default setting for sending email at the time of authorization.
10
Set usage restrictions and authority as necessary.
[Device Access]
Set whether or not to allow use of the device.
When the IC Card Reader (optional) is connected, you can select whether to allow the device use per
authentication method.
To Next Page
Loading...
