Interface Cables
35
Interface Cables
Using the Ethernet Interface
The following problems may be resolved by disabling [Energy Efficient Ethernet] under [Device] >
[Connectivity & Network Setup] > [Protocol Settings] > [Ethernet Settings].
Slow network connection on the device
Unstable network condition of the device which causes frequent timeout errors
The device fails to connect to the network after returning from a long-term Sleep mode
1
Press the Power button and select [Power Off] to switch off the power.
2
Make sure that the touch screen is blank and the Power button is not lit.
3
Connect a network cable to the Ethernet interface connector.
4
Press the Power button to switch on the power.
Using the USB Interface
1
Press the Power button and select [Power Off Device] to switch off the power.
2
Make sure that the touch screen is blank and the Power button is not lit.
3
Connect the USB cable to the interface connector.
4
Connect the other end of the USB cable to the computer.
5
Press the Power button to switch on the power.
6
Restart the computer.
To Next Page
Loading...
