Features List
183
[Original Size]
This feature allows you to set the size for the scan image.
Select the original size from the preset sizes or specify the size.
[Mixed Size Originals]
Scans originals of the same width but different length at a time and sends them to each
size paper. Sets the document on the document feeder.
Align the both right and left edges of the originals to avoid a paper jam.
When you select [Auto %] in [Reduce / Enlarge] and specify the output size, the scanned data is
automatically reduced/enlarged to the specified size.
If the size of original cannot be detected automatically, a screen to enter the size appears.
[Lighten / Darken]
This feature allows you to adjust the scan density.
[Sharpness]
This feature allows you to adjust the sharpness of the image.
[Reduce / Enlarge]
This feature allows you to set the scanning ratio for the original to be scanned.
When enabling [Searchable Text], [MRC High Compression], and [Specific Color] on [File Format], [Reduce /
Enlarge] becomes [100%] and cannot be changed.
[Quality / File Size]
This feature allows you to select an image compression level when [Color Scanning] is set to
[Color] or [Grayscale].
[Photographs]
Use this feature when scanning a color photograph.
You cannot use the document feeder with this feature.
When this feature is enabled, the Shadow Suppression and Background Suppression features cannot be used.
[Background Suppression]
This feature allows you to suppress the background color of originals such as newspaper
and colored paper.
This feature cannot be used with [Photographs].
To Next Page
Loading...
