13 Advanced Settings
276
[Add Domain Name]
Uses the full login credential name, including the domain name (after "@"), for the user
name.
[Original Size Defaults]
Set the document size displayed in [Original Size]. You can assign a document size to each
button other than [Auto Detect].
If you frequently use non-standard size paper for scanning, assigning the paper sizes to the
buttons will save your time to specify the size each time.
[Output Size Defaults]
Set the sizes to display when selecting [Auto %] for scanning documents at [Reduce /
Enlarge].
You can assign any output size to output size buttons.
Assigning the output sizes to the buttons will save your time to specify the size each time.
[Reduce / Enlarge Presets]
Set the magnifications displayed as [Proportional %] under [Reduce / Enlarge].
You can assign any magnification to the Reduce/Enlarge Preset buttons other than
[100%].
[Email Control]
You can configure the settings for email transmissions.
[Maximum Address Entries]
Set the maximum number of addresses that can be specified when sending an email.
The number of addresses is the total number of To:/Cc:/Bcc:.
You can set the maximum number of addresses from 1 to 100. If the maximum number of
addresses exceeds, the email transmission is aborted.
[Email Print Options]
When an email sent to the email address of the device is received, you can select the print
operation.
[Print Error Notification Email]
Select whether the error notification email because of an incorrect address or transmission
error should be automatically printed.
The job for printing error email is displayed as an error on the [Jobs] screen and a Job History Report even
when the job has been complete successfully.
[Response to Read Receipts]
Set whether or not to notify the sender that you have opened the email when a read receipt
(MDN) is requested.
[Display Read Receipts]
When an email is sent from the device, select whether or not to use the Read Receipts
feature.
To Next Page
Loading...
Need help?
General
