EasyManua.ls Logo

Fuji Xerox ApeosPort-VII C4421

Fuji Xerox ApeosPort-VII C4421
516 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 Advanced Settings
306
[IPv4 - IP Address Resolution]
Allows you to select a method for obtaining the IP address, subnet mask, and gateway
address.
[IPv4 - IP Address]
Enter the IP address when selecting [STATIC] at [IPv4 - IP Address Resolution].
[IPv4 - Subnet Mask]
Enter the subnet mask when selecting [STATIC] at [IPv4 - IP Address Resolution].
[IPv4 - Gateway Address]
Enter the gateway address when selecting [STATIC] at [IPv4 - IP Address Resolution].
[IPv4 - DNS Server Setup]
Set the DNS server.
[Get IP Address from DHCP]
Set whether or not to automatically obtain the address of the DNS server from the DHCP
server.
[Preferred DNS Server], [Alternate DNS Server 1], [Alternate DNS Server 2]
When you clear the checkmark of [Get IP Address from DHCP], manually set the DNS server
address.
Specify alternate DNS server addresses for [Alternate DNS Server 1] and [Alternate DNS
Server 2].
[IPv4 - IP Filter]
Select whether or not to limit the IPv4 addresses that can access the device.
Note
[IPv4 - IP Filter] applies to all features using TCP/IP, such as printing, Scan to Folder, CentreWare Internet
Services, and Web Applications services.
To set the IPv4 IP addresses that the device accepts connection from, use [IP Filtering] in CentreWare
Internet Services. For more information, refer to the help of CentreWare Internet Services or refer to "Using
CentreWare Internet Services" (P.84).
When [IP Filtering] is enabled, make sure to switch the FTP transfer mode to [Active Mode] to transfer the
scanned image from the device via FTP. You can switch the FTP transfer mode from CentreWare Internet
Services.
[IPv6 Address Manual Configuration]
Set whether or not to configure the IPv6-address settings manually.
[IPv6 - Manual Address]
This setting is configurable when you have checked [IPv6 Address Manual Configuration].
Specify an IPv6 address.
[IPv6 - Manual Prefix]
This setting is configurable when [IPv6 - Manual Address] is set. Specify a prefix length
from 0 to 128.
[IPv6 - Manual Gateway]
This setting is configurable when [IPv6 - Manual Address] is set. Specify a gateway address.

Table of Contents

Related product manuals