13 Advanced Settings
312
Changing to the other authentication system from [Azure Active Directory]
Changing to [Azure Active Directory] from the other authentication system
Changing the [Save Remote Accounts in This Device] setting to [Disabled] on [Azure Active Directory]
Changing the directory ID on [Azure Active Directory]
[Server Response Timeout]
Set the server time-out response.
[Search Timeout]
Set the user information search time-out.
[Kerberos Server Settings]
[Kerberos Server 1 (Default)] to [Kerberos Server 5]
Configure the Kerberos Servers 1 to 5.
The settings in [Kerberos Server 1 (Default)] will be the default settings for authentication.
[Primary Server Name / Address]
Enter the primary server name or IP address.
[Primary Server - Port Number]
Set the primary server port number.
Do not use the numbers assigned to the other ports.
[Secondary Server Name / Address]
Enter the secondary server name or IP address.
[Secondary Server - Port Number]
Set the secondary server port number.
Do not use the numbers assigned to the other ports.
[Domain Name]
When you use Active Directory of Windows Server as server, specify the domain name of
Active Directory in [Domain Name].
Enter a realm name in uppercase characters. Otherwise, an authentication error occurs.
[Server Certificate Verification]
Select whether or not to verify a server certificate.
[LDAP Server / Directory Service Settings]
Configure the directory server, authentication method, and search attributes and ranges for
LDAP authentication and the Address Book search by LDAP.
You can check the connection to the server by selecting [Connection Test]. Selecting
[Connection Test] > [Print LDAP Comm Report] outputs the report that shows the contents
of protocol of the LDAP communication transmitted and received by the device.
[Primary Server Name / Address]
Enter the primary server name or IP address.
To Next Page
Loading...
Need help?
General
