Fuji Xerox ApeosPort-VII C4421 User Manual

19 Appendix
484
Reduce/Enlarge 54
(Reduce/
Enlarge mode)
[0](Default): Preset %
[1]: Variable %
[2]: Fit to Cut Sheet
[Preset %] is a magnification automatically calculated based on [Original
Size] and [Paper Size], and reduces/enlarges the printable area of the
document to fit in the printable area of the output paper. Therefore, when
the size of the document and the output paper are the same, the ratio will be
100%. Also, if [2 Up] is selected, the document will be reduced to the size at
which two pages fit onto one sheet of paper. [Variable %] is a magnification
set in [Variable %] under [Reduce/ Enlarge]. A reference point for scaling
(reducing/enlarging) is the upper left corner of the printable area. This
reference point applies to all text, images, and graphics.
[Fit to Cut Sheet] prints the entire cut sheet area onto the printable area of
the output paper. It is a magnification automatically calculated based on
[Original Size] and [Paper Size], and reduces/enlarges the entire document
(including the area outside of the printable area) to fit onto the printable
area of the output paper.
Note

When a continuous form paper is selected for [Original Size], print result is
identical for [Preset %] and [Fit to Cut Sheet].
17
(Variable %/
vertical
magnification
)
[45 to 210](Default: 100): 45-210%
18
(Variable %/
horizontal
magnification
)
2 Up mode 21 [0](Default): Off
[1]: Forward
[2]: Reverse
Important

When [Landscape] is selected for [Original Size], print result is identical for
[Forward] and [Reverse].
Tray 5
confirmation
67 Prints from Tray 5, after you instruct to print and then operate the device to
start printing.
[0](Default): Off
[1]: On
Grid lines 22 Sets the method for printing double-byte grid lines.
[0](Default): Image
[1]: Font
2 Sided printing 12 [0](Default): Off
[1]: Head to Head
[2]: Head to Toe
Font 14
(Alphanumeric
fonts)
Sets the font for single-byte characters.
[0](Default): Roman
[1]: Sanserif
Important

Since this feature selects the default value, its setting will not be affected when an
extended command is received.
Setting Item Item Number Value

Fuji Xerox ApeosPort-VII C4421 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-VII C4421
Category	Printer
Language	English