Fuji Xerox C7776 Administrator's Guide

Problem Solving
486
Problem Solving
15
016-210
016-211
016-212
016-213
016-214
016-215
016-216
016-217
016-218
016-219
[Cause] An error occurred in the software.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-220
016-221
016-222
016-223
016-224
016-225
016-226
016-227
016-228
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-229
016-230
[Cause] An error occurred in the software
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-232
[Cause] An error occurred during initialization of the high compression
board.Otherwise, the high compression board is not supported
on your machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-233
[Cause] An error occurred in the software.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-234
016-235
016-236
016-237
016-238
016-239
[Cause] An error occurred in the Authentication feature of the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-240
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-242
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
Error Code
Cause and Remedy

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English