Fuji Xerox C7776 Administrator's Guide

Error Code
485
Problem Solving
15
012-210
012-211
012-212
012-213
012-221
012-223
012-224
012-231
012-243
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
012-249
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
012-259
012-260
012-261
012-263
012-265
012-268
012-269
012-280
012-282
012-283
012-284
[Cause] Finisher malfunction
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
012-291
012-295
012-296
[Cause] The finisher front cover is open.
[Remedy] Close the finisher front cover. If the error still is not resolved,
contact our Customer Support Center.
012-334
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
012-350
[Cause] An error occurred in the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
013-210
013-211
013-212
013-213
013-220
[Cause] An error occurred in the Booklet Unit.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
Error Code
Cause and Remedy

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English