Fuji Xerox C7776 Administrator's Guide

Problem Solving
502
Problem Solving
15
016-718
[Cause] Unable to process the PCL print data because of insufficient
memory.
[Remedy] Reduce the resolution, or cancel 2 sided printing or N up feature,
and then print again.
016-719
[Cause] Unable to process the PCL print data because of insufficient
print page buffer.
[Remedy] Increase the size of the print page buffer.
016-720
[Cause] An invalid command is included in PCL print data.
[Remedy] Confirm the print data and try printing again.
016-722
[Cause] The specified staple position is not supported by the machine,
or the paper size specified is not supported by the finisher.
[Remedy] Confirm the staple position and the paper size, and try printing
again.
016-723
[Cause] The specified punch position is not supported by the machine,
or the paper size specified is not supported by the finisher.
[Remedy] Confirm the punch position and the paper size, and try printing
again.
016-724
[Cause] The specified staple and punch position combination is
unsupported.
[Remedy] Specify the staple and punch positions on the same side, and try
printing again.
016-725
[Cause] A scanned document stored in a folder was to be sent by fax
using the Job Flow feature, but the file in the folder could not be
converted to fax data.
[Remedy] Do not use the Job Flow feature. Simply scan the document
from the machine’s [Fax] screen to send it by fax.
016-726
[Cause] Unable to automatically select a printer language because
PostScript data was sent with no Adobe PostScript 3 Kit
(optional) installed.
[Remedy] The Adobe PostScript 3 Kit (optional) must be installed.
016-727
[Cause] A print job was cancelled without storing a file into a folder
because the file was determined as not containing any pages.
[Remedy] The file could not be stored into the folder because the machine
determined the print file as not containing any pages. Disable
[Skip Blank Pages] on the [Advanced] tab on the print driver, or
add text to the file if the file is blank.
016-728
[Cause] An unsupported tag is included in the TIFF file.
[Remedy] Confirm the print data.
016-729
[Cause] Unable to print because the number of colors or the resolution
of the TIFF file exceeds the allowed range.
[Remedy] Change the number of colors or resolution for the TIFF file, and
execute the operation again.
016-731
[Cause] Unable to print TIFF data because it was interrupted.
[Remedy] Retry printing.
Error Code
Cause and Remedy

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English