Fuji Xerox C7776 Administrator's Guide

Error Code
503
Problem Solving
15
016-732
[Cause] The form specified by emulation has not been registered at the
host side.
[Remedy] Resend the form data.
016-733
[Cause] Probable causes are as follows:
1) Unable to obtain the IP address (the string after "@" in the
destination e-mail address) when e-mail is sent.
2) DNS server was unable to resolve the Internet address (the
string after "@") by the DNS server when e-mail is sent.
[Remedy] For 1), confirm the e-mail address.
For 2), confirm the DNS server address.
016-735
[Cause] Attempted to print [Job Template List] while updating the job
template.
[Remedy] Retry printing after waiting for a while.
016-738
[Remedy] Specify a paper size supported for booklet creation, and try
printing again.
016-739
[Remedy] Specify a combination of document size and paper size
supported for booklet creation, and try printing again.
016-740
[Remedy] Specify a paper tray supported for booklet creation, and try
printing again.
016-741
016-742
016-743
016-744
016-745
[Cause] An error occurred during the update process of the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
016-746
[Cause] An unsupported feature is included in the received PDF.
[Remedy] Print using a print driver.
016-747
[Cause] The memory became insufficient when using the Repeat Image
feature and the Annotations features simultaneously.
[Remedy] Take one of the following measures:
z
Increase the annotation image size.
z
Reduce the usage of Repeat Image.
016-748
[Cause] Unable to print because of insufficient hard disk space.
[Remedy] Reduce the number of print pages by dividing the print data or
by printing one copy at a time when printing multiple copies.
016-749
[Cause] Probable causes are as follows: For a print job:
1) The printer language received from the print driver is
unsupported by this machine.
For printing of a document received by Internet Fax:
2) The printer language of the document received from the
remote machine is unsupported by this machine.
[Remedy] For 1), use the machine’s print driver for printing. If the error still
is not resolved, contact our Customer Support Center.
For 2), request the sender to send Internet fax documents using
a printer language supported by the machine.
Error Code
Cause and Remedy

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English