Fuji Xerox C7776 Administrator's Guide

Appendix
726
Appendix
16
z
The call destination can be specified also with the keyboard displayed on the screen.
Note
z
To disconnect the call, select [Line Cut].
z
If your telephone line is set to touch-tone, [Tone (:)] does not appear.
z
If you want to send tones (or to use the touch-tone services) while using a pulse line, select [Tone (:)].
z
Some touch-tone services may not be available even if you set your telephone to send tones.
4 When the call is connected, lift the receiver and start speaking.
5 After the call is finished, place the receiver back in the cradle.
Important
z
Make sure that the receiver is placed properly in the cradle. Otherwise, the line remains "busy".

Fuji Xerox C7776 Specifications

General

Brand	Fuji Xerox
Model	C7776
Category	All in One Printer
Language	English