Output Format
133
Copy
3
z
Finisher D4/Finisher D4 with Booklet Maker
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled
in the orientation shown in the above table.
Paper Size and Punching Position
z
Finisher C2/Finisher C2 with Booklet Maker
-2 Holes
*
* : The distance between the two holes of Finisher C2/Finisher C2 with Booklet Maker is 80 mm and is 70 mm with the
3 Hole Punch Unit for C Finisher.
1 Staple
1 Top
Right
2 Staples 2 Top 2 Right
A4
B5 , 8 x 10" ,
8.5 x 11"
,
16K
A3
A4, B4,
8.5 x 11",
8.5 x 13"
,
8.5 x 14",
11 x 17",
8K
1 Left
Center
1 Top
Center
1 Right
Center
A4 , B5 , 8 x 10" , 8.5 x 11" , 16K
A4, A3, B4, 8.5 x 11"
, 8.5 x 13", 8.5 x 14",
11 x 17", 8K
2 Holes
Left
2 Holes
Top
2 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K , A4 Cover , 9 x 11"
A4, A3, B4, 215 x 315 mm, 8 x 10",
8.5 x 11", 8.5 x 13", 8.5 x 14", 11 x 15",
11 x 17", 8K
To Next Page
Loading...
