Fuji Xerox DocuCentre-V C2265 User Manual

Copy
119
Copy
3
 More
Displays the [Output Color] screen.
Reference
z
For more information, refer to "Output Color (Selecting the Color for Copying)" (P.118).
[Output Color] Screen
This screen allows you to make settings for full color, dual color, and single color.
1 Select [More].
2 Select the desired output color mode.
 Auto Detect
Automatically determines the color of the original document and makes copies in full color
if the original document is colored, or in single color (black) if the document is black-and-
white.
 Color
Copies in full color using all the four colors of toner: yellow, magenta, cyan, and black.
 Black & White
Copies in black and white regardless of the colors in the original document.
 Dual Color
Separates the colors of your document into the source colors and the other colors, and then
copies the document using two colors. Selecting [Dual Color] allows you to set the following:
 Source Color
Displays the [Source Color] screen on which you can select one or more colors from your
document to define them as source colors.
Reference
z
Refer to "Output Color (Selecting the Color for Copying)" (P.118).

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)