Image Quality
129
Copy
3
îš‹ Auto Suppression
When [Output Color] is set to [Black & White], the background of a document printed on
colored paper, such as newspaper, will be suppressed.
When [Output Color] is set to [Color], [Dual Color], or [Single Color], the color element on
white-color paper such as the blot, the print on the other side which is seen through and so
on will be suppressed.
z
When [Output Color] is set to [Color], you can change the level of background suppression. For more
information, refer to "Tools" > "Copy Service Settings" > "Copy Control" > "Background Suppression (Photo &
Text)" and "Background Suppression Level (Text)" in the Administrator Guide.
îš„ Contrast
îš‹ Auto Contrast
Automatically adjusts the brightness and hue of the original document to sharpen the
image.
z
[Auto Contrast] is not available when you use the document feeder.
îš‹ Manual Contrast
Allows you to select from the five levels between [More] and [Less].
Selecting an upper cell on the bar makes the difference between light and dark areas
greater; light areas become lighter and dark areas darker. In contrast, selecting a lower cell
on the bar makes the difference between light and dark areas smaller.
Color Effects (Selecting an Image Quality)
If you set this feature, the [Image Enhancement], [Image Options], [Color Shift], and [Color
Balance] settings are automatically adjusted and copies are made at the specified quality.
z
When the Color Effects feature is used, Auto Contrast is not available.
z
If other image-quality settings are made after you set [Color Effects], the setting made in [Color Effects] will
be cleared.
1 Select [Color Effects].
To Next Page
Loading...
Need help?
General
