Store to WSD
401
Scan
5
Store to WSD
This section describes the procedure to select features on the [Store to WSD] screen. The
Store to WSD service allows you to scan documents set on the machine from a network
computer. It also allows you to save the scanned data to a network computer.
z
Precautions for scanning from a computer
When you are away from the machine to operate a computer with the documents left on the machine, other
user may operate the machine and there is a risk of document loss and information leakage. Use a computer
which is as close to the machine as possible. When the scan process is complete, check that you have all pages
of the documents.
z
WSD stands for Web Services on Devices.
z
[Store to WSD] may not appear on the Services Home screen for some models. For more information, refer to
"Scanner Environment Settings" > "Configuration of Store to WSD" in the Administrator Guide.
z
This feature requires the scanner driver included as standard in Windows Vista Service Pack 2 or later. Thus,
this feature is not available for computers with older OS.
z
Resolution, file format and so on cannot be specified from the control panel of the machine. Specify these
settings in [Scan Profiles] of Windows. For more information on how to specify the settings, refer to Windows
Help.
1 Select [Store to WSD] on the Services Home screen.
2 Select a feature on the [Store to WSD] screen.
îš„ Start Scan Job From
Select from where to start a scan job.
îš‹ Computer
Starts a scan job by sending a request from a network computer.
îš‹ This Device
Starts a scan job with the scan command from the machine, and save the scanned data to
a network computer.
To Next Page
Loading...
Need help?
General
