z
Some field settings take effect after a reboot (after switching the power off and then on again, or after
changing the System Settings from the control panel).
z
During operation on the control panel, settings cannot be changed by CentreWare Internet Services.
z
To change the settings of items set by the system administrator, you need to enter a system administrator ID
and passcode. Ask your system administrator for the user ID and passcode.
Browser Settings
Before using this service, ensure the following settings on your browser.
The following describes the setting procedure for Internet Explorer 8.0.
z
Depending on the web browser used on your computer, CentreWare Internet Services may not work 
normally.
Tab Name Main Features
Status
z
Displaying the machine status
Displays the status of the paper trays, output trays, and consumables such as
toner cartridges.
z
Usage Counters
Displays the total number of pages used for each feature and cumulative
numbers.
z
Total Runtime
Displays [Output Device Runtime], [Scanner Runtime], [Standby Time], [Low
Power Time], [Sleep Time], [Warm-up Time], and [Power Off Time] by minutes.
Jobs
z
Listing active jobs and allowing you to delete the jobs, and displaying
completed jobs and error information
Print
z
Job Submission
Allows you to specify and print a file stored on your computer.
Scan
z
Job Templates
Allows you to create, edit, copy, and delete job templates.
z
Folder
Allows you to create and set folders. You can also delete and import files in a
folder.
z
Job Flow Sheets
Allows you to create, edit, and delete job flow sheets.
Address Book
z
Adding, editing, and deleting recipients in the Address Book.
z
Address Book
Allows you to view a list of the Address Book, delete the Address Book data, and
restrict users to access to the Address Book.
z
CSV file
Allows you to import a CSV file which is created by other than the machine, and
download the sample CSV file and a blank CSV file.
Properties
z
Displaying and setting the items such as Machine configuration, Interface, and
Emulation settings.
Support
z
Displaying support information