Fax/Internet Fax Options
267
Fax
4
îš‹ On
A Transmission Report is automatically printed when the transmission completes
successfully. If the transmission does not end successfully, a Transmission Report - Job
Undelivered is printed.
îš„ Read Receipts
îš‹ Off
Disables the Read Receipts feature.
îš‹ On
Enables the Read Receipts feature. You can check whether the Internet Fax you sent was
correctly delivered and the attached files were correctly processed.
îš„ Delivery Receipts
îš‹ Off
Disables the Delivery Receipts feature.
îš‹ On
Enables the Delivery Receipts feature. You can check whether the Internet Fax you sent was
correctly delivered to the destination folder.
Starting Rate (Selecting a Communication Mode)
You can select a communication mode based on the features of the remote machine.
G3 is the international standard for facsimile transmissions established by the ITU-T.
z
When you use speed dialing, one-touch buttons, group dial number or address book to specify a recipient registered in an address
number, the communication mode currently set to the address number is set and cannot be changed. For information on how to
register address numbers, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
z
You can change the default mode of [Starting Rate] in the System Administration mode. For information on
how to change the default mode, refer to "Tools" > "Fax Service Settings" > "Fax Defaults" > "Starting Rate" in
the Administrator Guide.
1 Select [Starting Rate].
To Next Page
Loading...
Need help?
General
