Fuji Xerox DocuCentre-V C2265 User Manual

Copy
192
Copy
3
1 Select [Area 1], [Area 2], or [Area 3].
2 Select the text box for [X1], and enter the value for X1 using the numeric keypad.
3 Select the text box for [Y1], and enter the value for Y1 using the numeric keypad.
4 Select the text box for [X2], and enter the value for X2 using the numeric keypad
5 Select the text box for [Y2], and enter the value for Y2 using the numeric keypad.
Note
z
If all of [X1], [Y1], [X2], and [Y2] are set to [0], the area will be invalid. If no other area is specified, the Delete
Outside/Delete Inside feature cannot be used.
z
Pressing the <C (Clear)> button clears the value you have entered.
 Clear Area 1 (Area 2 or Area 3)
Clears all the values set for Area 1 (Area 2 or Area 3).
Stored Programming (Calling a Stored Program for Build Job)
This feature allows you to call a stored program for Build Job.
Reference
z
This feature is the same as "Stored Programming" > "Calling a Stored Program" > "Calling a Stored Program for Build Job". For
more information, refer to Calling a Stored Program for Build Job(P.467).

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)