Fuji Xerox DocuCentre-V C2265 User Manual

Job Assembly
181
Copy
3
Job Assembly
This section describes the features you can select on the [Job Assembly] screen.
"Build Job (Processing Documents Scanned with Different Settings as One Job)" (P.181)
"Sample Job (Checking the Finished Output of the Copy)" (P.186)
"Combine Original Sets (Adding Originals)" (P.188)
"Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area)" (P.190)
"Stored Programming (Calling a Stored Program for Build Job)" (P.192)
1 Select [Copy] on the Services Home screen.
2 Select a feature on the [Job Assembly] screen.
Note
z
Drag or flick the screen vertically to switch the screen to be displayed. For information on how to drag or flick,
refer to "Touch Screen" (P.84).
Build Job (Processing Documents Scanned with Different Settings as
One Job)
This feature allows you to apply different copy settings to each document page or each
document stack, and then output the copies as one job.
Note
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)