About the Services Home screen
83
Product Overview
2
* : CSV (Comma Separated Values) is a file format that is often used for saving data by spreadsheets and
database programs.
z
Under [Default Language] in the System Administration mode, you can select the standard language
displayed on the touch screen when the power is switched on. For more information on how to set [Default
Language], refer to "Tools" > "Common Service Settings" > "Screen/Button Settings" > "Default Language" in
the Administrator Guide.
Screen Brightness
You can adjust the screen brightness of the touch screen.
Lock Out Printer/Release Printer
You can set the machine to temporarily enable printing during the printer lockout period or
to temporarily disable printing while [Release Printer] is displayed.
z
You can assign this button when [Printer Lockout] is set to [On] under [Tools] > [Common Service Settings] > [Machine Clock/
Timers] and the [Allow User to Lock Out] check box is selected. For information on how to assign the feature to the button, refer to
"Tools" > "Common Service Settings" > "Screen/Button Settings" in the Administrator Guide.
Setup
You can create or update folders, job flows, and the Address Book.
z
For more information, refer to "Tools" > "Setup" in the Administrator Guide.
Calibration
The machine can automatically calibrate colors when the reproducibility of density or color
in copies and prints deteriorates.
z
For more information, refer to "Maintenance" > "Executing Calibration" in the Administrator Guide.
Activity Report
You can print an Activity Report to check if a transmission is successfully completed.
z
For information on the contents listed in the Activity Report, refer to "Appendix" > "Activity Report" in the Administrator Guide.
Fax Receiving Mode
You can specify a mode for receiving faxes.
z
For more information, refer to "Machine Status" > "Machine Information" > "Fax Receiving Mode" in the Administrator Guide.
Print Mode
You can register a print mode and change its settings.
z
For more information, refer to "Machine Status" > "Machine Information" > "Print Mode" in the Administrator Guide.
To Next Page
Loading...
