Fuji Xerox DocuCentre-V C2265 User Manual

Job Assembly
187
Copy
3
the job after the confirmation. This feature also allows you to change the number of copy
sets. The sample copy is included in the total number of copy sets.
Note
z
After a sample set is output, if the machine is left uninstructed for the period specified in [Auto Clear], you
can set whether or not to start the data remained. For more information, refer to "Tools" > "Common Service
Settings" >"Other Settings" > "Paused Job Handling".
Reference
z
For more information on [Auto Clear], refer to "Tools" > "Common Service Settings" > "Machine Clock/Timers" > "Auto Job Release"
in the Administrator Guide.
1 Select [Sample Job].
2 Select [On].
 Off
No sample set is made.
 On
A sample set is made.
[Copy] Screen When Sample Job is in Progress
After the sample set is copied, the machine pauses the job and displays the [Copy] screen.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)