Fax Procedure
195
Fax
4
Document Feeder
The document feeder supports single and multiple sheet documents with sizes from 125 x
85 mm (Standard size: A5, A5 ) to 297 x 600 mm (long) (Standard size: A3, 11 x 17").
The document feeder automatically detects documents of standard-size widths.
z
The document feeder is optional for some models. For more information, contact our Customer Support
Center.
z
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the System Administration
mode. For information on [Paper Size Settings], refer to "Tools" > "Common Service Settings" > "Other Settings" > "Paper Size
Settings" in the Administrator Guide.
The sizes on the left are detected as the sizes shown on the right as follows.
The document feeder accepts the following number of sheets.
z
To avoid paper jams, use the document glass for folded or wrinkled documents, cut-and-pasted documents,
curled paper, or back carbon paper.
z
2-sided scanning of lightweight paper (38 - 49 gsm) is not supported.
z
For information on how to fax mixed sized documents, refer to "Mixed Size Originals (Scanning Different Size Documents
Simultaneously)" (P.141).
1 Remove any paper clips and staples before loading a document.
2 Load the document face up (when the document is 2-sided, place the front side up) in the
center of the document feeder.
Original Document Size Document Size Detected by the
Document Feeder
8-inch width document B5 width document
10-inch width document B4 width document
Document Type (Weight) Number of Sheets
Lightweight paper (38 - 49 gsm) 110 sheets
Plain paper (50 - 80 gsm) 110 sheets
Heavyweight paper (81 - 128 gsm) 75 sheets
To Next Page
Loading...
Need help?
General
