Fuji Xerox DocuCentre-V C2265 User Manual

Fax
218
Fax
4
Creating a job flow sheet to specify a forwarding address and then making a link
between the job flow sheet and the folder.
Reference
z
For information on how to create a job flow, refer to "Tools" > "Setup" > "Create Job Flow Sheet" in the Administrator Guide.
Important
z
Do not set the address of the machine as the forwarding address.
Note
z
You can register up to 100 forwarding addresses.
z
[Folder Number] and [Passcode] are required by the sender. Inform the sender of the settings.
z
If the fax you received is a JBIG-compressed image, and if the Internet Fax profile of the forwarding
destination is set to TIFF-F, the image is converted into MH format when forwarding. Also, if the Internet Fax
profile is TIFF-S, the fax image is forwarded as is without changing the size and resolution settings.
z
If the memory capacity in the machine becomes full while the machine is receiving an Internet fax, the
reception is canceled and the partly received file is deleted.
z
If there is a problem with the data during Internet Fax forwarding, the forwarding is canceled and the
received file is stored in the folder.
z
If forwarding using SMTP fails, the received file is stored in the folder.
z
You can confirm the forwarding result in a Job History Report.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)