Fuji Xerox DocuCentre-V C2265 User Manual

Before Using the Machine
30
Before Using the Machine
1
4.
Press the main power switch to the [ ] position to switch the main power off.
5. Press the <TEST> button lightly with a sharp edge such as a pen tip. The depressed
<RESET> button will stick out again.
If the <RESET> button sticks out, the ground fault interrupter is properly working. If the
<RESET> button remains in the depressed position, the ground fault interrupter has a
problem.
6. Press the <RESET> button back to the depressed position.
If the circuit does not work properly, contact your local Fuji Xerox representative.
Do not attempt to remove a paper deeply jammed inside the product, particularly a paper
wrapped around the fusing unit or the heat roller. Otherwise, it may cause injuries or burns.
Switch off the product immediately and contact your local Fuji Xerox representative.
Never touch the paper output area of the finisher during operation. It may cause injuries.
Be careful in removing jammed staples.
Be careful not to get injured by waste staples when detaching a staple dust box.
<TEST> button
<RESET> button
<RESET> button

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)