Scan
330
Scan
5
z
When the thumbnailed bar is displayed
In the enlarged view, the following operations are available:
z
When [Store to Folder] is selected, [TIFF] or [JPEG] is set for [File Format], or job flow sheets are used, the
[Rotate Left], [Rotate Right], and [Rotate Page] buttons are not displayed.
z
Drag or flick the enlarged image side to side or up and down to move the position to be
displayed.
z
Double-tap the previewed image to change the ratio of the image size.
z
Tap the preview area to switch whether to display the slider or thumbnailed bar.
z
Drag the slider to change the ratio of the image size.
z
Drag the thumbnailed bar side to side to scroll thumbnails. Tap the desired thumbnail to
be displayed.
îš„ (Rotate Left)
Rotates the page 90 degrees left.
z
You cannot select [Rotate Left] in the thumbnailed view.
îš„ (Rotate Right)
Rotates the page 90 degrees right.
z
You cannot select [Rotate Right] in the thumbnailed view.
îš„ (Rotate Page)
Rotates all pages 90 degrees right.
z
You cannot select [Rotate Page] in the enlarged view.
îš„ Cancel
Cancels the current job.
îš„ Save/Send
When [Store to Folder] or [Store to USB] is selected, [Save] is displayed. Select [Save] to
save the current job.
When [E-mail], [Store & Send Link], or [Scan to PC] is selected, [Send] is displayed. Select
[Send] to send the current job.
z
Closing a preview screen by selecting [Close] returns to step1.
When [Store to Folder] or [Store to USB] is selected, selecting [Save (Last Original)] saves a job.
To Next Page
Loading...
Need help?
General
