Fuji Xerox DocuCentre-V C2265 User Manual

Printing and Deleting Stored Jobs
511
Job Status
10
z
Drag the slider to change the ratio of the image size.
 Print Quantity
Specifies the number of print sets.
 Output Color
Displays the output color of the document to be printed.
 2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
 Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note
z
This item is displayed when the booklet layout is set using a printer driver.
z
When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
 Print
Prints the Private Charge Print job. After printing, the job is deleted.
Reference
z
Refer to When [Print] is Selected(P.511).
When [Print] is Selected
1 Specify how to process the job after printing.
Note
z
The screen as shown on the right does not appear if [Print Job Confirmation Screen] is set to [Disabled] in the
System Administration mode. If [Disabled] is selected, the machine automatically deletes the job after
printing without displaying the confirmation screen. For more information, refer to "Tools" > "Stored File
Settings" > "Print Job Confirmation Screen" in the Administrator Guide.
 Print and Delete
Starts printing the job. After printing, the job is deleted.

Fuji Xerox DocuCentre-V C2265 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	Up to 50, 000 pages
Duplex Printing	Yes
Memory	2 GB
Hard Disk Drive	160 GB
Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Color Scanner
Fax Transmission Speed	33.6 kbps
Max Paper Size	A3
Network Connectivity	Ethernet
Scan Speed	55 ppm (color) / 55 ppm (mono)
Connectivity	USB 2.0
Paper Size	A4, A5
Operating System Compatibility	Windows, Mac
Print Speed	Up to 25 ppm (color) / 25 ppm (mono)