Control Panel
75
Product Overview
2
7 <Interrupt> button Press this button to suspend a copy or print job in progress
to have the machine process another job. During the
Interrupt mode, the <Interrupt> button lights up. Pressing
the <Interrupt> button again exits the Interrupt mode and
resumes the suspended job.
z
For notes and restrictions on the Interrupt mode, refer to "Appendix" >
"Notes and Restrictions" > "Notes and Restrictions on the Interrupt Mode"
in the Administrator Guide.
8 <Clear All> button Returns the settings you made to the default values. The
machine returns to the same state as when it is powered
on.
9 <Stop> button Press this button to stop the current copy job or
communications.
10 <Start> button Press this button to start scanning a document.
11 <Main Power>
indicator
Lights up when the main power is switched on.
z
If the main power is not switched on, the machine will not be
powered on even when the power is switched on.
12 <Error> indicator Blinks if a system error occurs.
This indicator lights up when a problem other than a
system error occurs with the machine, including paper jams
and running out of paper or toner.
z
If the <Error> indicator blinks, contact our Customer Support Center.
z
If the <Error> indicator lights up, refer to "Problem Solving" >
"Machine Trouble" in the Administrator Guide.
13 <Data> indicator Blinks when the machine is sending or receiving data to or
from a client.
This indicator lights up when data is stored in the
machine's memory, when received faxes are waiting to be
printed, or when faxes are stored in a folder.
z
You can check stored scan files in a Folder List. For information on the
Folder List, refer to "Machine Status" > "Machine Information" > "Print
Reports" > "Folder List" in the Administrator Guide.
z
You can check stored fax files in a Stored File List. For
information on the Stored File List, refer to "Machine Status" >
"Machine Information" > "Print Reports" > "Job Status/Activity
Report" > "Stored File List" in the Administrator Guide.
z
You can change the blink pattern of the <Data> indicator. For
more information, refer to "Tools" > "Common Service
Settings" > "Other Settings" > "Data Indicator" in the
Administrator Guide.
14 <Speed Dial> button Press this button to specify a recipient with an address
number when sending a fax or e-mail.
15 <C (Clear)> button Press this button to cancel a numerical value you have
entered with the numeric keypad.
16 <Dial Pause> button Press this button to insert a pause into a destination
number.
17 Numeric keypad Use the numeric buttons on the keypad to enter the
number of copies, passcodes, and other numerical values.
No. Component Function
To Next Page
Loading...
Need help?
General
