FujiFilm NXT - Connecting an NXT Base to Other Machine Types

QD002-07 3. Machine Set Up
NXT Setup Manual 115
3.9 Connecting an NXT Base to Other Machine
Types
Follow the procedures below to connect an NXT to other machine types that are to be the
next and previous stages.
Note: In the following explanations, the example NXT panel flow is left to right.
When connecting other machine types to a NXT base.
Other
machine
type
Other
machine
type
NXT
base
NXTBAS128E
NXTBAS129Eb
Lane 1
Lane 2
Lane 1
Lane 2
3. Connector LANE1
4. Connector LANE2
1. Previous stage panel loading I/F box
2. Next stage panel loading I/F box
Other machine type
Connecting cable for the 1 and 2 lane
Other machine type
A type B type
3
3
1
4
2
4
<Previous Stage> < Next Stage>
NXT base