QD002-07 1. Safety Guideline
NXT Setup Manual 1
1. Safety Guideline
Fuji machines are designed and produced with safety as one of our main considerations.
However, even a perfectly designed machine can be damaged, or someone can still be
injured if the user does not follow the safety rules. It is the responsibility of the user to make
sure all safety rules are followed during operation and maintenance.
Be sure to read these safety rules before operating the machine. Keep this manual close
at hand when operating the machine.
1.1 About Symbols
To avoid injury to persons and damage to the machine, Fuji employs a number of messages
and symbols that are used in manuals and on the machines. Be sure you understand the
meanings of these symbols before reading the manual.
1.1.1 Degree of Hazards
1.1.2 Examples of the Symbols
Symbol Definition
DANGER
Failure to observe this hazard warning will lead to severe
injury or death.
WARNING
Failure to observe this hazard warning may lead to severe
injury or death.
CAUTION
Failure to observe this hazard warning may lead to
personal injury or damage to the machine.
Symbol Explanation
Hazard
A triangle is used to draw your attention to a hazard. The symbol
inside the triangle indicates the nature of the hazard (in this case,
electrical shock).
Prohibition
A circle with a diagonal line is used to draw your attention to an
operation that is prohibited. The symbol inside the circle indicates
the nature of the operation (in this case, disassembly).
A circle with an exclamation mark is used to draw your attention to to
a mandatory action. In other words, you are required to carefully
carry out the given instructions.
To Next Page
Loading...