5. Accessory Software Installation QD002-07
128 NXT Setup Manual
5.3 Installing Fuji Flexa
This must be installed before installing Accessory Software. If Fuji Flexa is already installed
on the computer then proceed to the next section. It is not necessary to install a “complete”
Fuji Flexa installation, a “Fuji Flexa External Component” installation is sufficient. For
detailed information on installing Fuji Flexa, refer to the “Fuji Flexa Setup Manual”.
If NXT accessory software installation is attempted on a computer without Fuji Flexa
installed, the message shown below displays.
1. Insert the Fuji Flexa Installation CD-ROM into the CD-ROM drive.
To Next Page
Loading...