FujiFilm NXT - Accessory Software Installation; Introduction; Installation outline

QD002-07 3. Machine Set Up
NXT Setup Manual 117
3.9.2 Signal Cable Connecting Diagram
(Other machine type - NXT - Other machine type)
EEHH143*(3 m)
EEHH118*
(Conversion harness)
EEHH117* (
Conversion
harness
)
RH0814*(3 m)
RH0814*(3 m) RH0816*(3 m)
RH0816*(3 m)
RH0816*(3 m)
RH0814*(3 m)
EEHH174*(1.5 m) EEHH175*(5 m)
EEHH143*(3 m) EEHH174*(1.5 m) EEHH175*(5 m)
EEHH143*(3 m) EEHH174*(1.5 m) EEHH175*(5 m)
EEHH143*(3 m) EEHH174*(1.5 m) EEHH175*(5 m)
LANE1-F LANE2-F CN-M1 CN-M2
LANE2-R
LANE1-R
RH0070*, connected
before shipping
RH0067*, connected
before shipping
Other machine type NXT base Other machine type
When using LANE 2 When using LANE 2
(Previous stage side)
(Previous stage side)
NXTBS105E
(Next stage side)
(Next stage side)