2. Setting Up the NXT QD002-07
22 NXT Setup Manual
Note: * Perform the items required based on the line composition.
** These steps are only necessary if Fujitrax Verifier is to be used.
5. Accessory
Software
Installation
Required Items 13 Ensure that the necessary items to install
Accessory Software are available.
Installing Fuji Flexa 14 Install Fuji Flexa on the computer that
Accessory Software is to be installed, if it is
not already installed.
Installing NXT Accessory Software 15 Install the Accessory Software on the
computer that is to act as the Accessory
Software server.
6. Setting Up Fujitrax Verifier
Required Items Installing and
running the Central
Server
16** Ensure that the Central Server for Fujitrax
Verifier has been installed and is running.
Adding the NXT to
the Fujitrax line
configuration
17** Add the NXT machine to the line
configuration for the Kit Server that is to be
used for the NXT.
Setting the NXT
Fujitrax
configuration
settings
18** Change the Fujitrax configuration settings
on the NXT.
Registering users
for Kit Handy access
19** Register the ID for the users that are to
access NXT data through Kit Handy.
Chap
ter
Section Ord. Step
To Next Page
Loading...