QD002-07 5. Accessory Software Installation
NXT Setup Manual 145
5.5 Installing the Realtime Workingrate Buffer
Service
The Realtime Workingrate Buffer Service (RWB service) must be installed on all Fuji Flexa
communication server computers that are used for NXTs. This process can be performed
once the Accessory Software Server has been installed and is running. The Accessory
Software server is accessed through the web browser and the necessary software is
downloaded and installed from this server.
1. Double-click the [Internet Explorer] icon on the desktop of the computer running the Fuji
Flexa communication server for a NXT.
2. Enter the address (URL) "http://<NXT accessory software server name>/fujiweb" and
then press Enter. If the server computer is located and the server is running, a loading
page displays. Once the necessary items have been loaded, the [Home] page displays.
This page provides basic information on the NXT machines.
3. Click [Service List] from the header in Floor Monitor.
4. Click [Download] at the bottom of the screen. The screen changes to the donwload
screen.
5. Click [Download] to start the download process.
6. Click [Open] in the dialog box that displays. This option means that the software will be
downloaded to the computer and the installation process will automatically start. If
[Save] is selected, the installer will only be downloaded and saved on the computer, not
automatically started after the save location is specified.
7. Click [Yes] in the message box that asks if the RWB service should be installed. If the
service has already been installed, a second message displays, asking if the service
should be updated with the downloaded service.
8. Select the installation destination folder and click [Next]. The software is installed.
9. Click [Finish] to complete the installation process. It is necessary to restart the computer
to start the service.
To Next Page
Loading...